1 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-8_Materials and Heat Balance in
Gasification |
english |
UG |
|
|
2 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Data and scales in measurements |
english |
UG |
|
|
3 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Discrete and continuous data |
english |
UG |
|
|
4 |
Mechanical
engineering |
Technology of
Surface Coating |
Assessment of Coating Hardness |
english |
UG |
|
|
5 |
Metallurgy and
material science |
Material
Characterization |
Factors affecting intensities of X-ray peaks-
continuation |
english |
UG |
|
|
6 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 40: Ladle de-sulphurization, alloying,
stainless steel making |
english |
UG |
|
|
7 |
Mechanical
engineering |
Plastic Working Of
Metallic Materials |
Lec 1: Introduction to Plastic Working of Metals |
english |
UG |
|
|
8 |
Aerospace
Engineering |
Experimental Methods
in Fluid Mechanics |
Lec 1: Basic concepts, Calibration. |
english |
UG |
|
|
9 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-20.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
10 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lec-36 MOS capacitor |
english |
UG |
|
|
11 |
Mechanical
engineering |
Viscous Fluid Flow |
Lec 3: Derivation of incompressible Navier-Stokes
equations |
english |
UG |
|
|
12 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Introduction to Kinetics of Phase Transformation |
english |
UG |
|
|
13 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Elements of centrifugal compressor |
english |
UG |
|
|
14 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-32 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
15 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 28-Gas Dynamics |
english |
UG |
|
|
16 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Sustaining Mechanism of Turbulence- 1 |
english |
UG |
|
|
17 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-19 Strength of Materials |
english |
UG |
|
|
18 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-7_Production of Secondary Fuels:
Gasification |
english |
UG |
|
|
19 |
Mechanical
engineering |
Technology of
Surface Coating |
Physical Characterization |
english |
UG |
|
|
20 |
Metallurgy and
material science |
Material
Characterization |
Factors affecting intensities of X-ray peaks |
english |
UG |
|
|
21 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 39: Homogenization and Gas stirred ladle |
english |
UG |
|
|
22 |
Aerospace
Engineering |
COMBUSTION |
Lecture 50: Detonations |
english |
UG |
|
|
23 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-19.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
24 |
Mechanical
engineering |
Viscous Fluid Flow |
Lec 2: Fluid Kinematics |
english |
UG |
|
|
25 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Phase Diagram and G vs X plot - I |
english |
UG |
|
|
26 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Phase Diagram and G vs X plot - II Completed |
english |
UG |
|
|
27 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Tutes – 3 |
english |
UG |
|
|
28 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-31 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
29 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 27-Gas Dynamics |
english |
UG |
|
|
30 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-18 Strength of Materials |
english |
UG |
|
|
31 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-6_Heat Balance and Clean Development
Mechanism |
english |
UG |
|
|
32 |
Mechanical
engineering |
Micro and Smart
Systems |
Microsystems: some Examples |
english |
UG |
|
|
33 |
Mechanical
engineering |
Tribology |
Friction |
english |
UG |
|
|
34 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Statistics in Metrology, an intoduction (Part 1) |
english |
UG |
|
|
35 |
Mechanical
engineering |
Technology of
Surface Coating |
Measurement of Low Pressure and Gas Flow in
Coating Deposition System |
english |
UG |
|
|
36 |
Metallurgy and
material science |
Material
Characterization |
X-ray scattering |
english |
UG |
|
|
37 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 38: Secondary Steel making: Vacuum
Techniques for refining steel |
english |
UG |
|
|
38 |
Aerospace
Engineering |
COMBUSTION |
Lecture 49: Combustion Instabilities |
english |
UG |
|
|
39 |
Mechanical
engineering |
Viscous Fluid Flow |
Lec 1: Preliminary concepts |
english |
UG |
|
|
40 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Solid - Solid Transformation and Nucleation rate -
I Completed |
english |
UG |
|
|
41 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Solid - Solid Transformation and Nucleation rate -
II |
english |
UG |
|
|
42 |
Aerospace
Engineering |
Introduction to CFD |
Calculus of Variations - Three Lemmas and a
Theorem |
english |
UG |
|
|
43 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Free Vortex theory; Single-Multi-stage
characteristics |
english |
UG |
|
|
44 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 26-Gas Dynamics |
english |
UG |
|
|
45 |
Mechanical
engineering |
Cryogenic
Engineering |
Material Properties at Low Temperature |
english |
UG |
|
|
46 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-17 Strength of Materials |
english |
UG |
|
|
47 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-5_Materials Balance in Coke-making |
english |
UG |
|
|
48 |
Mechanical
engineering |
Micro and Smart
Systems |
Microactuators |
english |
UG |
|
|
49 |
Mechanical
engineering |
Technology of
Surface Coating |
Production of High Vacuum |
english |
UG |
|
|
50 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 36: Secondary Steel making: Introduction
and de-oxidation |
english |
UG |
|
|
51 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 37: Secondary Steel making: Introduction
and de-oxidation (continued) |
english |
UG |
|
|
52 |
Mechanical
engineering |
Metrology |
Micro and Nano stages, Nano technology
instrumentation |
english |
UG |
|
|
53 |
Aerospace
Engineering |
COMBUSTION |
Lecture 48: Turbulent Combustion 2 |
english |
UG |
|
|
54 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-17.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
55 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lec-34 Solar cells |
english |
UG |
|
|
56 |
Mechanical
engineering |
Spray Theory and
Application |
Spray combustion |
english |
UG |
|
|
57 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Heterogeneous Nucleation-I |
english |
UG |
|
|
58 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Heterogeneous Nucleation-II |
english |
UG |
|
|
59 |
Aerospace
Engineering |
Introduction to CFD |
Multigrid method - final, Parallel Computing |
english |
UG |
|
|
60 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Cascade analysis; Loss and Blade performance
estimation |
english |
UG |
|
|
61 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-29 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
62 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 25-Gas Dynamics |
english |
UG |
|
|
63 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Fully-Developed Laminar Flows Heat Transfer - 2 |
english |
UG |
|
|
64 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-16 Strength of Materials |
english |
UG |
|
|
65 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-4_Production of Secondary Fuels :
Carbonization |
english |
UG |
|
|
66 |
Mechanical
engineering |
Tribology |
Introduction |
english |
UG |
|
|
67 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Optical measurements and Nanometrology (Part 1 ) |
english |
UG |
|
|
68 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Optical measurements and Nanometrology (Part 2 ) |
english |
UG |
|
|
69 |
Mechanical
engineering |
Technology of
Surface Coating |
Production of Low Vacuum |
english |
UG |
|
|
70 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 35: Electric steel making |
english |
UG |
|
|
71 |
Aerospace
Engineering |
COMBUSTION |
Lecture 47: Turbulent Combustion 1 |
english |
UG |
|
|
72 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-16.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
73 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lec-33 Fundamentals of p-n junction contd. |
english |
UG |
|
|
74 |
Mechanical
engineering |
Spray Theory and
Application |
Droplet combustion |
english |
UG |
|
|
75 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Interfacial Energy-I |
english |
UG |
|
|
76 |
Aerospace
Engineering |
Introduction to CFD |
Multigrid method |
english |
UG |
|
|
77 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Axial Compressors : two dimensional analytical
model |
english |
UG |
|
|
78 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 24-Gas Dynamics |
english |
UG |
|
|
79 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Fully-Developed Laminar Flows Heat Transfer - 1 |
english |
UG |
|
|
80 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-15 Strength of Materials |
english |
UG |
|
|
81 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-3_Characterization of Fuels: Concepts |
english |
UG |
|
|
82 |
Mechanical
engineering |
Conduction and
Radiation |
Conduction with change of phase contd… |
english |
UG |
|
|
83 |
Mechanical
engineering |
Technology of
Surface Coating |
Combustion Spray Process |
english |
UG |
|
|
84 |
Metallurgy and
material science |
Material
Characterization |
Properties of X-rays |
english |
UG |
|
|
85 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 34: Hybrid Processes |
english |
UG |
|
|
86 |
Mechanical
engineering |
Metrology |
In-process gauging and control |
english |
UG |
|
|
87 |
Aerospace
Engineering |
COMBUSTION |
Lecture 46: Spray Combustion 2 |
english |
UG |
|
|
88 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-15.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
89 |
Mechanical
engineering |
Spray Theory and
Application |
Droplet evaporation |
english |
UG |
|
|
90 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Solved Problem on Nucleation rate |
english |
UG |
|
|
91 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
How to determine the value of γsl (Physical
Concept and Interfacial Energy) |
english |
UG |
|
|
92 |
Aerospace
Engineering |
Introduction to CFD |
Accelerating convergence, Intro to Multigrid
method |
english |
UG |
|
|
93 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-27 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
94 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 23-Gas Dynamics |
english |
UG |
|
|
95 |
Mechanical
engineering |
Cryogenic
Engineering |
Properties of Cryogenic Fluids |
english |
UG |
|
|
96 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Fully-Developed Laminar Flows- 2 |
english |
UG |
|
|
97 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-14 Strength of Materials |
english |
UG |
|
|
98 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-2_Characterization of Fuels: Concepts |
english |
UG |
|
|
99 |
Mechanical
engineering |
Conduction and
Radiation |
Conduction with change of phase |
english |
UG |
|
|
100 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Pressure measurements (Part 2) |
english |
UG |
|
|
101 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Strain measurements (Part 1) |
english |
UG |
|
|
102 |
Mechanical
engineering |
Technology of
Surface Coating |
Mechanical, Chemical and Ion-Assisted Method |
english |
UG |
|
|
103 |
Metallurgy and
material science |
Material
Characterization |
Basics of X-ray emission from source, electron
excitation and X-ray interaction with materials in
general |
english |
UG |
|
|
104 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 33: Evolution of impurities in steel and
slag constituents during LD processing |
english |
UG |
|
|
105 |
Mechanical
engineering |
Metrology |
Feature measurement using CMM, Laser vision |
english |
UG |
|
|
106 |
Aerospace
Engineering |
COMBUSTION |
Lecture 45: Spray Combustion 1 |
english |
UG |
|
|
107 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-14.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
108 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Nucleation Treatment Single Component
(Solid-Liquid) - I |
english |
UG |
|
|
109 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Nucleation Treatment Single Component
(Solid-Liquid) - II |
english |
UG |
|
|
110 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-26 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
111 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 22-Gas Dynamics |
english |
UG |
|
|
112 |
Mechanical
engineering |
Cryogenic
Engineering |
Introduction to Cryogenic Engineering |
english |
UG |
|
|
113 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Fully-Developed Laminar Flows- 1 |
english |
UG |
|
|
114 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Lecture-13 Strength of Materials |
english |
UG |
|
|
115 |
Metallurgical
Engineering and
Material Science |
Fuels Refractory and
Furnaces |
Lecture-1_Energy Resources and Environment |
english |
UG |
|
|
116 |
Mechanical
engineering |
Conduction and
Radiation |
Numerical methods in conduction contd… |
english |
UG |
|
|
117 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Pressure measurements (Part 1) |
english |
UG |
|
|
118 |
Mechanical
engineering |
Technology of
Surface Coating |
Plasma Spray Process |
english |
UG |
|
|
119 |
Metallurgy and
material science |
Material
Characterization |
Tutorial Problems on SEM |
english |
UG |
|
|
120 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
LD steelmaking: Basics, process steps, emulsion
formation and stabilization |
english |
UG |
|
|
121 |
Mechanical
engineering |
Metrology |
CMM probes and CMM software |
english |
UG |
|
|
122 |
Aerospace
Engineering |
COMBUSTION |
Lecture 44: Droplet Burning 2 |
english |
UG |
|
|
123 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-13.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
124 |
Mechanical
engineering |
Spray Theory and
Application |
Multiphase modelling ? Selection of model-2 |
english |
UG |
|
|
125 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Finding Value of Driving Force (ΔG) and Single
Component (liquid-solid) |
english |
UG |
|
|
126 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Finding Value of Driving Force (ΔG) and
Nucleation Single Component (liquid-solid) |
english |
UG |
|
|
127 |
Aerospace
Engineering |
Introduction to CFD |
Demo - One Dimensional flow |
english |
UG |
|
|
128 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Tube-2 |
english |
UG |
|
|
129 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-25 Alternate Fules and Advances In IC
Engines |
english |
UG |
|
|
130 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 21-Gas Dynamics |
english |
UG |
|
|
131 |
Mechanical
engineering |
Advanced Gas
Dynamics |
Supersonic Flow past a 3D Bluff Body at an angle
of attack |
english |
UG |
|
|
132 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Laminar Internal Flows |
english |
UG |
|
|
133 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Microscopic Structural Analysis of Nanomaterials-
II |
english |
UG |
|
|
134 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Other Characterization Techniques |
english |
UG |
|
|
135 |
Mechanical
engineering |
Conduction and
Radiation |
Numerical methods in conduction |
english |
UG |
|
|
136 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Temperature measurements; |
english |
UG |
|
|
137 |
Mechanical
engineering |
Technology of
Surface Coating |
Sputter Deposition of Nitride Coating |
english |
UG |
|
|
138 |
Metallurgy and
material science |
Material
Characterization |
Electron channeling contrast imaging (ECCI),
Electron back scattered diffraction(EBSD)-Theory &
instrument demonstration |
english |
UG |
|
|
139 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 31: LD Steel making: Oxygen lance and jet
action & decarburization |
english |
UG |
|
|
140 |
Mechanical
engineering |
Metrology |
Universal measuring machine (UMM) and Coordinate
measuring machine (CMM) |
english |
UG |
|
|
141 |
Aerospace
Engineering |
COMBUSTION |
Lecture 43: Droplet Burning 1 |
english |
UG |
|
|
142 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-12.Instability and Transition of Fluid
Flows |
english |
UG |
|
|
143 |
Mechanical
engineering |
Spray Theory and
Application |
Multiphase modelling ? Selection of model-1 |
english |
UG |
|
|
144 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Thermodynamics of Phase Transformation Driving
force of Phase Transformation |
english |
UG |
|
|
145 |
Metallurgy and
material science |
Heat Treatment and
Surface Hardening I |
Thermodynamics of Phase Transformation and Driving
Force for Phase Transformation |
english |
UG |
|
|
146 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Analysis of engine real cycles |
ug |
- |
|
|
147 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-24 Alternate Fules and Advances In IC
Engines |
ug |
- |
|
|
148 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 20-Gas Dynamics |
ug |
- |
|
|
149 |
Mechanical
engineering |
Advanced Gas
Dynamics |
Supersonic Flow past a 3D Cone at an angle of
attack: Numerical Procedure |
ug |
- |
|
|
150 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
Superposition Theory |
ug |
- |
|
|
151 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Strength of Materials |
ug |
- |
|
|
152 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Microscopic Structural Analysis of Nanomaterials-
I |
ug |
- |
|
|
153 |
Mechanical
engineering |
Conduction and
Radiation |
Analytical solution for Laplace equation |
ug |
- |
|
|
154 |
Mechanical
engineering |
Technology of
Surface Coating |
Coating on Abrasive Grain |
ug |
- |
|
|
155 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 21: Burden Distribution |
ug |
OTHER |
|
|
156 |
Mechanical
engineering |
Metrology |
Angle measurement - 2 |
ug |
OTHER |
|
|
157 |
Aerospace
Engineering |
COMBUSTION |
Lecture 34: Flame Stabilisation 1 |
ug |
OTHER |
|
|
158 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lecture 20: Non-linear dielectric behavior |
ug |
OTHER |
|
|
159 |
Mechanical
engineering |
Spray Theory and
Application |
Design of pressure swirl atomizer-2 |
ug |
OTHER |
|
|
160 |
Mechanical
engineering |
Nonlinear Vibration |
Stability Analysis of Periodic response |
ug |
OTHER |
|
|
161 |
Aerospace
Engineering |
Introduction to CFD |
Demo - Modified equation, Wave equation |
ug |
OTHER |
|
|
162 |
Metallurgical
Engineering and
Material Science |
Advanced Ceramics
for Strategic
Applications |
Ferroelectric , Piezoelectric and Pyroelectric
Ceramics |
ug |
OTHER |
|
|
163 |
Aerospace
Engineering |
Jet Aircraft
Propulsion |
Introduction & Development of Jet Aircraft
Propulsion |
ug |
OTHER |
|
|
164 |
Aerospace
Engineering |
Aerospace Propulsion |
Cycle Analysis : Turbojet II |
ug |
OTHER |
|
|
165 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-15 Alternate Fules and Advances In IC
Engines |
ug |
OTHER |
|
|
166 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 11-Gas Dynamics |
ug |
OTHER |
|
|
167 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
L4-Scalar Transport Equations |
ug |
OTHER |
|
|
168 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Strength of Materials |
ug |
OTHER |
|
|
169 |
Aerospace
Engineering |
High Speed Aero
Dynamics |
One-dimensional waves (Contd.) |
ug |
OTHER |
|
|
170 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Basic Properties: Polymers |
ug |
OTHER |
|
|
171 |
Mechanical
engineering |
Vibration of
Structures |
Topic in Beam Vibration - II |
ug |
OTHER |
|
|
172 |
Mechanical
engineering |
Conduction and
Radiation |
Conduction- Energy equation |
ug |
OTHER |
|
|
173 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Lecture 16, Laboratory demonstration, Thread
gauge, spirit level |
ug |
OTHER |
|
|
174 |
Mechanical
engineering |
Technology of
Surface Coating |
Radio frequency and pulsed DC sputtering |
ug |
OTHER |
|
|
175 |
Metallurgy and
material science |
Material
Characterization |
Lecture 10 continuation-Tutorial problems |
ug |
OTHER |
|
|
176 |
Mechanical
engineering |
Metrology |
Angle measurement - 1 |
ug |
OTHER |
|
|
177 |
Aerospace
Engineering |
COMBUSTION |
Lecture 33: Bunsen Burner 2 |
ug |
OTHER |
|
|
178 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lecture 19: Linear dielectric behavior |
ug |
OTHER |
|
|
179 |
Mechanical
engineering |
Spray Theory and
Application |
Design of pressure swirl atomizer-1 |
ug |
OTHER |
|
|
180 |
Mechanical
engineering |
Nonlinear Vibration |
Free Vibration of multi- degree of freedom
Nonlinear systems with Cubic and quadratic
nonlinearities |
ug |
OTHER |
|
|
181 |
Aerospace
Engineering |
Introduction to CFD |
Artificial dissipation, upwinding, generating
schemes |
ug |
OTHER |
|
|
182 |
Metallurgical
Engineering and
Material Science |
Advanced Ceramics
for Strategic
Applications |
Electrical Phenomenon in Insulators (Contd.) |
ug |
OTHER |
|
|
183 |
Aerospace
Engineering |
Rocket Propulsion |
Electrical and Nuclear Rockets; Advanced
Propulsion |
ug |
OTHER |
|
|
184 |
Aerospace
Engineering |
Aerospace Propulsion |
Cycle Analysis : Turbojet I |
ug |
OTHER |
|
|
185 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-14 Alternate Fules and Advances In IC
Engines |
ug |
OTHER |
|
|
186 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 10-Gas Dynamics |
ug |
OTHER |
|
|
187 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
L3-Laws of Convection |
ug |
OTHER |
|
|
188 |
Mechanical
Engineering and
Science |
Strength of
Materials |
Solid Mechanics |
ug |
OTHER |
|
|
189 |
Aerospace
Engineering |
High Speed Aero
Dynamics |
One-dimensional waves |
ug |
OTHER |
|
|
190 |
Metallurgical
Engineering and
Material Science |
Fundamentals of
electronic device
fabrication |
Density of states and Fermi-Dirac statistics |
ug |
OTHER |
|
|
191 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Basic Properties: Ceramics |
ug |
OTHER |
|
|
192 |
Mechanical
engineering |
Vibration of
Structures |
Topic in Beam Vibration - I |
ug |
OTHER |
|
|
193 |
Mechanical
engineering |
Conduction and
Radiation |
Conduction- Introduction |
ug |
OTHER |
|
|
194 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Lecture 14, Angular Measurements (Part 2) |
ug |
OTHER |
|
|
195 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Lecture 15, Laboratory demonstration, Vernier
height |
ug |
OTHER |
|
|
196 |
Mechanical
engineering |
Technology of
Surface Coating |
Unbalanced Magnetron Sputtering |
ug |
OTHER |
|
|
197 |
Metallurgy and
material science |
Material
Characterization |
Lecture 10-Tutorial problems |
ug |
OTHER |
|
|
198 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 19: Coking Process |
ug |
OTHER |
|
|
199 |
Mechanical
engineering |
Metrology |
Introduction to gears |
ug |
OTHER |
|
|
200 |
Aerospace
Engineering |
COMBUSTION |
Lecture 32: Bunsen Burner 1 |
ug |
OTHER |
|
|
201 |
Aerospace
Engineering |
Instability and
Transition of Fluid
Flows |
Lecture-01.Instability and Transition of Fluid
Flows |
ug |
OTHER |
|
|
202 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lecture 18: Semiconductor junctions in
band-diagrams |
ug |
OTHER |
|
|
203 |
Mechanical
engineering |
Spray Theory and
Application |
Linear stability analysis - Planar Liquid Sheet
instability -2 |
ug |
OTHER |
|
|
204 |
Mechanical
engineering |
Nonlinear Vibration |
Free Vibration of Single degree of freedom
Nonlinear systems with Cubic and quadratic
nonlinearities: effect of damping |
ug |
OTHER |
|
|
205 |
Aerospace
Engineering |
Introduction to CFD |
Effect of higher derivative terms on Wave equation |
ug |
OTHER |
|
|
206 |
Metallurgical
Engineering and
Material Science |
Advanced Ceramics
for Strategic
Applications |
Electrical Phenomenon in Insulators |
ug |
OTHER |
|
|
207 |
Aerospace
Engineering |
Rocket Propulsion |
Electrical Thrusters |
ug |
OTHER |
|
|
208 |
Aerospace
Engineering |
Aerospace Propulsion |
Cycle Analysis : Ramjet |
ug |
OTHER |
|
|
209 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-13 Alternate Fules and Advances In IC
Engines |
ug |
OTHER |
|
|
210 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 09-Gas Dynamics |
ug |
OTHER |
|
|
211 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
L2-Flow Classifications |
ug |
OTHER |
|
|
212 |
Mechanical
Engineering and
Science |
Automation in
Manufacturing |
Lec 37: CNC machines and interpolation |
ug |
OTHER |
|
|
213 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Basic Properties: Metals II |
ug |
OTHER |
|
|
214 |
Mechanical
engineering |
Vibration of
Structures |
Approximate Methods |
ug |
OTHER |
|
|
215 |
Mechanical
engineering |
Conduction and
Radiation |
Emissivities and absorptivities of Gas mixtures |
ug |
OTHER |
|
|
216 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Lecture 13, Angular Measurements (Part 1 ) |
ug |
OTHER |
|
|
217 |
Mechanical
engineering |
Technology of
Surface Coating |
Magnetron Sputtering |
ug |
OTHER |
|
|
218 |
Metallurgy and
material science |
Material
Characterization |
Lecture 9-Sample preparation techniques for
optical microscopy |
ug |
OTHER |
|
|
219 |
Aerospace
Engineering |
High Speed Aero
Dynamics |
One-dimensional gas dynamics (Contd.) |
ug |
OTHER |
|
|
220 |
Metallurgical
Engineering and
Material Science |
Fundamentals of
electronic device
fabrication |
Extrinsic semiconductors - Fermi level |
ug |
OTHER |
|
|
221 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 18: Pelletization of Iron Ore |
ug |
OTHER |
|
|
222 |
Mechanical
engineering |
Metrology |
Measurement of screw thread elements |
ug |
OTHER |
|
|
223 |
Aerospace
Engineering |
COMBUSTION |
Lecture 31: Flame Speed Dependencies, G-Equation |
ug |
OTHER |
|
|
224 |
Aerospace
Engineering |
Jet and Rocket
Propulsion |
Lecture40- Jet and Rocket Propulsion |
ug |
OTHER |
|
|
225 |
Metallurgy and
material science |
Optoelectronic
Materials and
Devices |
Lecture 17: Equilibrium carrier statistics in
semiconductors: carrier freeze out |
ug |
OTHER |
|
|
226 |
Mechanical
engineering |
Spray Theory and
Application |
Linear stability analysis - Planar Liquid Sheet
instability -1 |
ug |
OTHER |
|
|
227 |
Mechanical
engineering |
Nonlinear Vibration |
Free Vibration of Single degree of freedom
Nonlinear systems with Cubic and quadratic
nonlinearities |
ug |
OTHER |
|
|
228 |
Aerospace
Engineering |
Introduction to CFD |
Laplace equation - convergence rate |
ug |
OTHER |
|
|
229 |
Metallurgical
Engineering and
Material Science |
Advanced Ceramics
for Strategic
Applications |
Electrical Conduction in Ceramics (Contd.) |
ug |
OTHER |
|
|
230 |
Aerospace
Engineering |
Rocket Propulsion |
Principles of Electrostatic and Electromagnetic
Rockets |
ug |
OTHER |
|
|
231 |
Aerospace
Engineering |
Aerospace Propulsion |
General Performance Parameters II |
ug |
OTHER |
|
|
232 |
Mechanical
engineering |
Alternate Fules and
Advances In IC
Engines |
Lecture-12 Alternate Fules and Advances In IC
Engines |
ug |
OTHER |
|
|
233 |
Aerospace
Engineering |
Gas Dynamics |
Lecture 08-Gas Dynamics |
ug |
OTHER |
|
|
234 |
Mechanical
engineering |
Convective Heat and
Mass Transfer |
L1-Introduction |
ug |
OTHER |
|
|
235 |
Mechanical
Engineering and
Science |
Automation in
Manufacturing |
Lec 36: Computer aided manufacturing and process
planning |
ug |
OTHER |
|
|
236 |
Aerospace
Engineering |
High Speed Aero
Dynamics |
One-dimensional gas dynamics (Contd.) |
ug |
OTHER |
|
|
237 |
Metallurgical
Engineering and
Material Science |
Fundamentals of
electronic device
fabrication |
Extrinsic semiconductors |
ug |
OTHER |
|
|
238 |
Metallurgical
Engineering and
Material Science |
Structural analysis
of Nanomaterials |
Basic Properties: Metals I |
ug |
OTHER |
|
|
239 |
Mechanical
engineering |
Vibration of
Structures |
Applications of Modal Solution |
ug |
OTHER |
|
|
240 |
Mechanical
engineering |
Conduction and
Radiation |
Enclosure analysis in the presence of absorbing/
emitting gas |
ug |
OTHER |
|
|
241 |
Mechanical
Engineering and
Science |
Engineering
Metrology |
Lecture 12, Laboratory demonstration, Dial gauge
and vernier, micrometer, surface plate, feeler
gauge |
ug |
OTHER |
|
|
242 |
Mechanical
engineering |
Technology of
Surface Coating |
Chemical Vapour Deposition of Aluminium Oxide |
ug |
OTHER |
|
|
243 |
Metallurgy and
material science |
Material
Characterization |
Lecture 8- Differential interference contrast and
fluorescence microscopy |
ug |
OTHER |
|
|
244 |
Metallurgy and
material science |
Ironmaking and
Steelmaking |
Lecture 17: Sintering of Iron Ore |
ug |
OTHER |
|
|
245 |
Mechanical
engineering |
Metrology |
Screw thread production and terminology |
ug |
OTHER |
|
|
246 |
Aerospace
Engineering |
COMBUSTION |
Lecture 30: Laminar Premixed Flames - Rigorous
Analysis 2 |
ug |
OTHER |
|
|
247 |
Aerospace
Engineering |
Jet and Rocket
Propulsion |
Lecture39- Jet and Rocket Propulsion |
ug |
OTHER |
|
|
|