1 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
06-02-2023
Monday-
|
Time
Time
|
00:00:00 - 00:29:47 || |
2 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
06-02-2023
Monday-
|
Time
Time
|
00:29:47 - 01:00:31 || |
3 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
06-02-2023
Monday-
|
Time
Time
|
01:00:31 - 02:01:59 || |
4 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
06-02-2023
Monday-
|
Time
Time
|
02:01:59 - 02:32:35 || |
5 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
06-02-2023
Monday-
|
Time
Time
|
02:32:35 - 03:01:40 || |
6 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
06-02-2023
Monday-
|
Time
Time
|
03:01:40 - 04:16:48 || |
7 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
06-02-2023
Monday-
|
Time
Time
|
04:16:48 - 05:20:48 || |
8 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
06-02-2023
Monday-
|
Time
Time
|
05:20:48 - 06:19:05 || |
9 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
06-02-2023
Monday-
|
Time
Time
|
06:19:05 - 07:08:44 || |
10 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
06-02-2023
Monday-
|
Time
Time
|
07:08:44 - 08:00:34 || |
11 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 18: Closure costs and Rehabilitation Costs |
Prof. Khanindra Pathak |
UG |
06-02-2023
Monday-
|
Time
Time
|
08:00:34 - 08:37:33 || |
12 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 19: Finance and Accounting: Closure cost
estimate |
Prof. Khanindra Pathak |
UG |
06-02-2023
Monday-
|
Time
Time
|
08:37:33 - 09:13:04 || |
13 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 59: Cutter Path Generation (Concluding Part)
and Current Status - CNC Machining and Related
Processes |
Prof. Asimava Roy Choudhury |
UG |
06-02-2023
Monday-
|
Time
Time
|
09:13:04 - 09:43:27 || |
14 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 60: Questions and Discussions on Curved
Surface Machining |
Prof. Asimava Roy Choudhury |
UG |
06-02-2023
Monday-
|
Time
Time
|
09:43:27 - 10:14:54 || |
15 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 04: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
06-02-2023
Monday-
|
Time
Time
|
10:14:54 - 11:29:21 || |
16 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 22: Microstructure of Non-Graphitizing Carbon |
Prof. Swati Sharma |
UG |
06-02-2023
Monday-
|
Time
Time
|
11:29:21 - 12:04:52 || |
17 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 23: Glass-Like Carbon: Introduction and
Properties |
Prof. Swati Sharma |
UG |
06-02-2023
Monday-
|
Time
Time
|
12:04:52 - 12:33:07 || |
18 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 24: Parallel Staging Concept |
Prof. Ashok Joshi |
UG |
06-02-2023
Monday-
|
Time
Time
|
12:33:07 - 12:53:13 || |
19 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 25: Parallel Staging Benefits |
Prof. Ashok Joshi |
UG |
06-02-2023
Monday-
|
Time
Time
|
12:53:13 - 13:18:56 || |
20 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 18: Rankine cycle, Brayton cycle, Stirling and
Ericsson cycles |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
06-02-2023
Monday-
|
Time
Time
|
13:18:56 - 14:17:55 || |
21 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 43: Autonomous Mobile Robots and Mobile
Manipulators |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
06-02-2023
Monday-
|
Time
Time
|
14:17:55 - 14:36:07 || |
22 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 44: Legged and Hybrid Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
06-02-2023
Monday-
|
Time
Time
|
14:36:07 - 15:02:25 || |
23 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 08: Summary of equations |
Prof. Harish N Dixit |
UG |
06-02-2023
Monday-
|
Time
Time
|
15:02:25 - 15:30:53 || |
24 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 09: Capillary statics shape of meniscus part 1 |
Prof. Harish N Dixit |
UG |
06-02-2023
Monday-
|
Time
Time
|
15:30:53 - 16:00:44 || |
25 |
Aerospace
Engineering |
Aircraft Design |
Lec 44: Numerical of Weight Fraction |
Dr. A.K. Ghosh |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
16:00:44 - 16:55:43 || |
26 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 04: Concepts of thermodynamics pertinent to
electrochemical cells |
Prof. Subhasish Basu Majumder |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
16:55:43 - 17:54:43 || |
27 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 20 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
17:54:43 - 18:23:46 || |
28 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 21 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
18:23:46 - 18:49:55 || |
29 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 25: Fracture Toughness (Contd.) |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
18:49:55 - 19:17:06 || |
30 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 26: Fracture Toughness (Contd.) |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
19:17:06 - 19:52:57 || |
31 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 02: Work and Heat Transfer - First Law of
Thermodynamics |
Prof. Niranjan Sahoo |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
19:52:57 - 21:01:44 || |
32 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 12: Boundary Layer Equations in Turbulent
Flows |
Prof. Rinku Mukherjee |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
21:01:44 - 22:01:57 || |
33 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 11 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
22:01:57 - 22:32:45 || |
34 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 12 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
22:32:45 - 23:04:39 || |
35 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 33: Concentric Tube Resonator: Partially
Perforated Pipe or Airway (MATLAB) |
Prof. Akhilesh Mimani |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
23:04:39 - 24:00:00 || |
36 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
37 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
38 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
39 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
40 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
41 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
42 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
43 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
44 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
45 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
46 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 18: Closure costs and Rehabilitation Costs |
Prof. Khanindra Pathak |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
47 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 19: Finance and Accounting: Closure cost
estimate |
Prof. Khanindra Pathak |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
48 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 59: Cutter Path Generation (Concluding Part)
and Current Status - CNC Machining and Related
Processes |
Prof. Asimava Roy Choudhury |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
49 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 60: Questions and Discussions on Curved
Surface Machining |
Prof. Asimava Roy Choudhury |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
50 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 04: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
51 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 22: Microstructure of Non-Graphitizing Carbon |
Prof. Swati Sharma |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
52 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 23: Glass-Like Carbon: Introduction and
Properties |
Prof. Swati Sharma |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
53 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 24: Parallel Staging Concept |
Prof. Ashok Joshi |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
54 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 25: Parallel Staging Benefits |
Prof. Ashok Joshi |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
55 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 18: Rankine cycle, Brayton cycle, Stirling and
Ericsson cycles |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
56 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 43: Autonomous Mobile Robots and Mobile
Manipulators |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
57 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 44: Legged and Hybrid Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
58 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 08: Summary of equations |
Prof. Harish N Dixit |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
59 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 09: Capillary statics shape of meniscus part 1 |
Prof. Harish N Dixit |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
60 |
Aerospace
Engineering |
Aircraft Design |
Lec 44: Numerical of Weight Fraction |
Dr. A.K. Ghosh |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
61 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 04: Concepts of thermodynamics pertinent to
electrochemical cells |
Prof. Subhasish Basu Majumder |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
62 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 20 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
63 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 21 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
64 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 25: Fracture Toughness (Contd.) |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
65 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 26: Fracture Toughness (Contd.) |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
66 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 02: Work and Heat Transfer - First Law of
Thermodynamics |
Prof. Niranjan Sahoo |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
67 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 12: Boundary Layer Equations in Turbulent
Flows |
Prof. Rinku Mukherjee |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
68 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 11 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
69 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 12 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
70 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 33: Concentric Tube Resonator: Partially
Perforated Pipe or Airway (MATLAB) |
Prof. Akhilesh Mimani |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
|
71 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
00:00:00 - 01:03:21 || |
72 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
01:03:21 - 01:42:55 || |
73 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
01:42:55 - 02:16:57 || |
74 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
02:16:57 - 02:49:44 || |
75 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
02:49:44 - 03:19:24 || |
76 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
03:19:24 - 03:50:12 || |
77 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
03:50:12 - 04:23:21 || |
78 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
04:23:21 - 05:29:05 || |
79 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
05:29:05 - 06:15:56 || |
80 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
06:15:56 - 06:47:32 || |
81 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
06:47:32 - 07:18:20 || |
82 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
07:18:20 - 08:01:07 || |
83 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
08:01:07 - 08:30:54 || |
84 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
08:30:54 - 09:01:38 || |
85 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
09:01:38 - 10:03:06 || |
86 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
10:03:06 - 10:33:42 || |
87 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
10:33:42 - 11:02:47 || |
88 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
11:02:47 - 12:17:55 || |
89 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
12:17:55 - 13:21:55 || |
90 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
13:21:55 - 14:20:12 || |
91 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
14:20:12 - 15:09:51 || |
92 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
07-02-2023
Tuesday-
|
Time
Time
|
15:09:51 - 16:01:41 || |
93 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 18: Closure costs and Rehabilitation Costs |
Prof. Khanindra Pathak |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
16:01:41 - 16:38:40 || |
94 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 19: Finance and Accounting: Closure cost
estimate |
Prof. Khanindra Pathak |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
16:38:40 - 17:14:11 || |
95 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 59: Cutter Path Generation (Concluding Part)
and Current Status - CNC Machining and Related
Processes |
Prof. Asimava Roy Choudhury |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
17:14:11 - 17:44:34 || |
96 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 60: Questions and Discussions on Curved
Surface Machining |
Prof. Asimava Roy Choudhury |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
17:44:34 - 18:16:01 || |
97 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 04: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
18:16:01 - 19:30:28 || |
98 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 22: Microstructure of Non-Graphitizing Carbon |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
19:30:28 - 20:05:59 || |
99 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 23: Glass-Like Carbon: Introduction and
Properties |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
20:05:59 - 20:34:14 || |
100 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 24: Parallel Staging Concept |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
20:34:14 - 20:54:20 || |
101 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 25: Parallel Staging Benefits |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
20:54:20 - 21:20:03 || |
102 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 18: Rankine cycle, Brayton cycle, Stirling and
Ericsson cycles |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
21:20:03 - 22:19:02 || |
103 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 43: Autonomous Mobile Robots and Mobile
Manipulators |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
22:19:02 - 22:37:14 || |
104 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 44: Legged and Hybrid Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
22:37:14 - 23:03:32 || |
105 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 08: Summary of equations |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
23:03:32 - 23:32:00 || |
106 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 09: Capillary statics shape of meniscus part 1 |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
23:32:00 - 24:00:00 || |
107 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
108 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
109 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
110 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
111 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
112 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
113 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
114 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
115 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
116 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
117 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
118 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
119 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
120 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
121 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
122 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
123 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
124 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
125 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
126 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
127 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
128 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
129 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 18: Closure costs and Rehabilitation Costs |
Prof. Khanindra Pathak |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
130 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 19: Finance and Accounting: Closure cost
estimate |
Prof. Khanindra Pathak |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
131 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 59: Cutter Path Generation (Concluding Part)
and Current Status - CNC Machining and Related
Processes |
Prof. Asimava Roy Choudhury |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
132 |
Mechanical
Enineering |
Elements of metal
cutting, Machine
tools, gear cutting
and CNC machining |
Lec 60: Questions and Discussions on Curved
Surface Machining |
Prof. Asimava Roy Choudhury |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
133 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 04: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
134 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 22: Microstructure of Non-Graphitizing Carbon |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
135 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 23: Glass-Like Carbon: Introduction and
Properties |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
136 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 24: Parallel Staging Concept |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
137 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 25: Parallel Staging Benefits |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
138 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 18: Rankine cycle, Brayton cycle, Stirling and
Ericsson cycles |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
139 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 43: Autonomous Mobile Robots and Mobile
Manipulators |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
140 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 44: Legged and Hybrid Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
141 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 08: Summary of equations |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
142 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 09: Capillary statics shape of meniscus part 1 |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
|
143 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
00:00:00 - 00:57:25 || |
144 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
00:57:25 - 01:59:10 || |
145 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
01:59:10 - 03:00:18 || |
146 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
03:00:18 - 03:39:20 || |
147 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
03:39:20 - 04:18:22 || |
148 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
04:18:22 - 04:46:16 || |
149 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
04:46:16 - 05:07:37 || |
150 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
05:07:37 - 06:05:07 || |
151 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
06:05:07 - 06:24:25 || |
152 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
06:24:25 - 06:52:54 || |
153 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
06:52:54 - 07:32:05 || |
154 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
07:32:05 - 08:00:21 || |
155 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
08:00:21 - 09:03:42 || |
156 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
09:03:42 - 09:43:16 || |
157 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
09:43:16 - 10:17:18 || |
158 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
10:17:18 - 10:50:05 || |
159 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
10:50:05 - 11:19:45 || |
160 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
11:19:45 - 11:50:33 || |
161 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
11:50:33 - 12:23:42 || |
162 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
12:23:42 - 13:29:26 || |
163 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
13:29:26 - 14:16:17 || |
164 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
14:16:17 - 14:47:53 || |
165 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
14:47:53 - 15:18:41 || |
166 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
08-02-2023
Wednesday-
|
Time
Time
|
15:18:41 - 16:01:28 || |
167 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
16:01:28 - 16:31:15 || |
168 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
16:31:15 - 17:01:59 || |
169 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
17:01:59 - 18:03:27 || |
170 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
18:03:27 - 18:34:03 || |
171 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
18:34:03 - 19:03:08 || |
172 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
09-02-2023
Thursday-
|
Time
Time
|
19:03:08 - 20:18:16 || |
173 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
09-02-2023
Thursday-
|
Time
Time
|
20:18:16 - 21:22:16 || |
174 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
09-02-2023
Thursday-
|
Time
Time
|
21:22:16 - 22:20:33 || |
175 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
09-02-2023
Thursday-
|
Time
Time
|
22:20:33 - 23:10:12 || |
176 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
09-02-2023
Thursday-
|
Time
Time
|
23:10:12 - 24:00:00 || |
177 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
178 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
179 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
180 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
181 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
182 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
183 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
184 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
185 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
186 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
187 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
188 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
189 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
190 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
191 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
192 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
193 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
194 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
195 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
196 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
197 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
198 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
199 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
200 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
201 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 37: Pack Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
202 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 38: Fluidized Bed Carburizing |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
203 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 03: Laser System: Construction and Types |
Prof. Shrikrishna N. Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
204 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 15: Scanning Ion Microscopy - An Introduction |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
205 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 16: Ions Versus Electrons as Source for
Microscopy |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
206 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 42: Spin Stabilization (Contd.) |
Dr. Manoranjan Sinha |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
207 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 28: Process Modeling for Powder Feed Additive
Manufacturing (Part 2) |
Prof. Sajan Kapil |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
208 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 44: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
209 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 26: Flexible robots |
Prof. Ashitava Ghosal |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
210 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 35: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
09-02-2023
Thursday-
|
Time
Time
|
|
211 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
00:00:00 - 00:31:46 || |
212 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
09-02-2023
Thursday-
|
Time
Time
|
00:31:46 - 00:59:21 || |
213 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
00:59:21 - 02:01:15 || |
214 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
02:01:15 - 02:35:31 || |
215 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 18: GFIS Properties and Ion Optical Column |
Prof. Debabrata Pradhan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
02:35:31 - 03:07:29 || |
216 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 43: Control Moment Gyroscope |
Dr. Manoranjan Sinha |
UG |
09-02-2023
Thursday-
|
Time
Time
|
03:07:29 - 04:07:48 || |
217 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 29: Laser Beam based Powder Bed Additive
Manufacturing (Part 1) |
Prof. Sajan Kapil |
UG |
09-02-2023
Thursday-
|
Time
Time
|
04:07:48 - 05:03:22 || |
218 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 45: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
09-02-2023
Thursday-
|
Time
Time
|
05:03:22 - 06:03:05 || |
219 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 27: Introduction, Lagrangian formulation |
Prof. Ashitava Ghosal |
UG |
09-02-2023
Thursday-
|
Time
Time
|
06:03:05 - 06:50:00 || |
220 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 36: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
09-02-2023
Thursday-
|
Time
Time
|
06:50:00 - 07:26:30 || |
221 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 37: Design of Low Speed Compressor |
Prof. Chetankumar Sureshbhai Mistry |
UG |
09-02-2023
Thursday-
|
Time
Time
|
07:26:30 - 08:01:14 || |
222 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
09-02-2023
Thursday-
|
Time
Time
|
08:01:14 - 08:58:39 || |
223 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
08:58:39 - 10:00:24 || |
224 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
10:00:24 - 11:01:32 || |
225 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
09-02-2023
Thursday-
|
Time
Time
|
11:01:32 - 11:40:34 || |
226 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
09-02-2023
Thursday-
|
Time
Time
|
11:40:34 - 12:19:36 || |
227 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
12:19:36 - 12:47:30 || |
228 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
09-02-2023
Thursday-
|
Time
Time
|
12:47:30 - 13:08:51 || |
229 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
09-02-2023
Thursday-
|
Time
Time
|
13:08:51 - 14:06:21 || |
230 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
14:06:21 - 14:25:39 || |
231 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
09-02-2023
Thursday-
|
Time
Time
|
14:25:39 - 14:54:08 || |
232 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
09-02-2023
Thursday-
|
Time
Time
|
14:54:08 - 15:33:19 || |
233 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
09-02-2023
Thursday-
|
Time
Time
|
15:33:19 - 16:01:35 || |
234 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
10-02-2023
Friday-
|
Time
Time
|
16:01:35 - 17:04:56 || |
235 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
17:04:56 - 17:44:30 || |
236 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
17:44:30 - 18:18:32 || |
237 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
18:18:32 - 18:51:19 || |
238 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
18:51:19 - 19:20:59 || |
239 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
19:20:59 - 19:51:47 || |
240 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
19:51:47 - 20:24:56 || |
241 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
10-02-2023
Friday-
|
Time
Time
|
20:24:56 - 21:30:40 || |
242 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
10-02-2023
Friday-
|
Time
Time
|
21:30:40 - 22:17:31 || |
243 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
22:17:31 - 22:49:07 || |
244 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
22:49:07 - 23:19:55 || |
245 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
10-02-2023
Friday-
|
Time
Time
|
23:19:55 - 24:00:00 || |
246 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
247 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
248 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
249 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
250 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 18: GFIS Properties and Ion Optical Column |
Prof. Debabrata Pradhan |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
251 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 43: Control Moment Gyroscope |
Dr. Manoranjan Sinha |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
252 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 29: Laser Beam based Powder Bed Additive
Manufacturing (Part 1) |
Prof. Sajan Kapil |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
253 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 45: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
254 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 27: Introduction, Lagrangian formulation |
Prof. Ashitava Ghosal |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
255 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 36: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
256 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 37: Design of Low Speed Compressor |
Prof. Chetankumar Sureshbhai Mistry |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
257 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
258 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
259 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
260 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
261 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
262 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
263 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
264 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
265 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
266 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
267 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
268 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
269 |
Aerospace
Engineering |
Aircraft Design |
Lec 45: Inspection of Sinus 912 Motor Glider |
Dr. A.K. Ghosh |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
270 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 05: Kinetics of electrochemical cells and
structural characteristics of electrodes |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
271 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 06: Introduction to EMF, redox potential,
Faraday law and Nernst's law |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
272 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 22 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
273 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 23 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
274 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 27: Environment Assisted Fracture |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
275 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 28: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
276 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 03: Heat Engines and Refrigerators/Heat Pump -
Second Law of Thermodynamics |
Prof. Niranjan Sahoo |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
277 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13A: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
278 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 13 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
279 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 14 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
280 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 34: Review of Perforate Impedance Expressions |
Prof. Akhilesh Mimani |
UG |
10-02-2023
Friday-
|
Time
Time
|
|
281 |
Aerospace
Engineering |
Aircraft Design |
Lec 46: Numericals |
Dr. A.K. Ghosh |
UG |
10-02-2023
Friday-
|
Time
Time
|
00:00:00 - 01:03:46 || |
282 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 07: Terminology related to secondary battery :
half-cell,full-cell, redox couple,positive |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
01:03:46 - 01:41:36 || |
283 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 08: Measurements: Cyclic voltammetry, nominal
voltage, capacity, rate performance |
Prof. Subhasish Basu Majumder |
UG |
10-02-2023
Friday-
|
Time
Time
|
01:41:36 - 02:14:41 || |
284 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 24 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
02:14:41 - 02:39:07 || |
285 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 25 |
Prof. Somnath Bhowmick |
UG |
10-02-2023
Friday-
|
Time
Time
|
02:39:07 - 03:05:34 || |
286 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 29: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
03:05:34 - 03:34:21 || |
287 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 30: Introduction to Fatigue |
Prof. Indrani Sen |
UG |
10-02-2023
Friday-
|
Time
Time
|
03:34:21 - 04:12:27 || |
288 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 04: Entropy Analysis (Part I) |
Prof. Niranjan Sahoo |
UG |
10-02-2023
Friday-
|
Time
Time
|
04:12:27 - 05:22:51 || |
289 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13B: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
10-02-2023
Friday-
|
Time
Time
|
05:22:51 - 06:04:51 || |
290 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 15 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
06:04:51 - 06:36:26 || |
291 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 16 |
Prof. Srikant Sukumar |
UG |
10-02-2023
Friday-
|
Time
Time
|
06:36:26 - 07:09:10 || |
292 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 35: MATLAB Demonstration for Fully and
Partially Perforated CTR |
Prof. Akhilesh Mimani |
UG |
10-02-2023
Friday-
|
Time
Time
|
07:09:10 - 08:00:41 || |
293 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
10-02-2023
Friday-
|
Time
Time
|
08:00:41 - 08:32:27 || |
294 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
10-02-2023
Friday-
|
Time
Time
|
08:32:27 - 09:00:02 || |
295 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
10-02-2023
Friday-
|
Time
Time
|
09:00:02 - 10:01:56 || |
296 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
10-02-2023
Friday-
|
Time
Time
|
10:01:56 - 10:36:12 || |
297 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 18: GFIS Properties and Ion Optical Column |
Prof. Debabrata Pradhan |
UG |
10-02-2023
Friday-
|
Time
Time
|
10:36:12 - 11:08:10 || |
298 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 43: Control Moment Gyroscope |
Dr. Manoranjan Sinha |
UG |
10-02-2023
Friday-
|
Time
Time
|
11:08:10 - 12:08:29 || |
299 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 29: Laser Beam based Powder Bed Additive
Manufacturing (Part 1) |
Prof. Sajan Kapil |
UG |
10-02-2023
Friday-
|
Time
Time
|
12:08:29 - 13:04:03 || |
300 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 45: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
10-02-2023
Friday-
|
Time
Time
|
13:04:03 - 14:03:46 || |
301 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 27: Introduction, Lagrangian formulation |
Prof. Ashitava Ghosal |
UG |
10-02-2023
Friday-
|
Time
Time
|
14:03:46 - 14:50:41 || |
302 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 36: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
10-02-2023
Friday-
|
Time
Time
|
14:50:41 - 15:27:11 || |
303 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 37: Design of Low Speed Compressor |
Prof. Chetankumar Sureshbhai Mistry |
UG |
10-02-2023
Friday-
|
Time
Time
|
15:27:11 - 16:01:55 || |
304 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
11-02-2023
Saturday-
|
Time
Time
|
16:01:55 - 16:59:20 || |
305 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
16:59:20 - 18:01:05 || |
306 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
18:01:05 - 19:02:13 || |
307 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
19:02:13 - 19:41:15 || |
308 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
19:41:15 - 20:20:17 || |
309 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
20:20:17 - 20:48:11 || |
310 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
20:48:11 - 21:09:32 || |
311 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
11-02-2023
Saturday-
|
Time
Time
|
21:09:32 - 22:07:02 || |
312 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
22:07:02 - 22:26:20 || |
313 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
22:26:20 - 22:54:49 || |
314 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
11-02-2023
Saturday-
|
Time
Time
|
22:54:49 - 23:34:00 || |
315 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
11-02-2023
Saturday-
|
Time
Time
|
23:34:00 - 24:00:00 || |
316 |
Aerospace
Engineering |
Aircraft Design |
Lec 46: Numericals |
Dr. A.K. Ghosh |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
317 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 07: Terminology related to secondary battery :
half-cell,full-cell, redox couple,positive |
Prof. Subhasish Basu Majumder |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
318 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 08: Measurements: Cyclic voltammetry, nominal
voltage, capacity, rate performance |
Prof. Subhasish Basu Majumder |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
319 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 24 |
Prof. Somnath Bhowmick |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
320 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 25 |
Prof. Somnath Bhowmick |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
321 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 29: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
322 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 30: Introduction to Fatigue |
Prof. Indrani Sen |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
323 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 04: Entropy Analysis (Part I) |
Prof. Niranjan Sahoo |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
324 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13B: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
325 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 15 |
Prof. Srikant Sukumar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
326 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 16 |
Prof. Srikant Sukumar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
327 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 35: MATLAB Demonstration for Fully and
Partially Perforated CTR |
Prof. Akhilesh Mimani |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
328 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
329 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
330 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
331 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
332 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 18: GFIS Properties and Ion Optical Column |
Prof. Debabrata Pradhan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
333 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 43: Control Moment Gyroscope |
Dr. Manoranjan Sinha |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
334 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 29: Laser Beam based Powder Bed Additive
Manufacturing (Part 1) |
Prof. Sajan Kapil |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
335 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 45: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
336 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 27: Introduction, Lagrangian formulation |
Prof. Ashitava Ghosal |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
337 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 36: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
338 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 37: Design of Low Speed Compressor |
Prof. Chetankumar Sureshbhai Mistry |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
339 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 20: Closure Economics and Audit |
Prof. Khanindra Pathak |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
340 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 01 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
341 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05A: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
342 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 24: Glass-Like Carbon: Industrial
Manufacturing |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
343 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 25: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
344 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 26: Jet Damping and Ballistic Missiles |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
345 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 27: Current Rocket Concepts |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
346 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 19: Thermodynamic property relations, Jacobean
and Legendre transformations, Maxwell's equations |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
347 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 45: Underwater and Aerial Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
348 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 46: Healthcare Robots |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
349 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 10: Capillary statics shape of meniscus part 2 |
Prof. Harish N Dixit |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
350 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 11: Shape of static meniscus-Energy
minimisation part 1 |
Prof. Harish N Dixit |
UG |
11-02-2023
Saturday-
|
Time
Time
|
|
351 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 21: Application of Remote Sensing for Mine
Closure-Introduction |
Prof. Khanindra Pathak |
UG |
11-02-2023
Saturday-
|
Time
Time
|
00:00:00 - 01:00:21 || |
352 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 02 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
01:00:21 - 01:39:51 || |
353 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 03 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
01:39:51 - 02:04:50 || |
354 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05B: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
02:04:50 - 03:03:42 || |
355 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 26: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
03:03:42 - 03:26:13 || |
356 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 27: X-Ray and Nano-Imprint Lithography |
Prof. Swati Sharma |
UG |
11-02-2023
Saturday-
|
Time
Time
|
03:26:13 - 04:03:49 || |
357 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 28: Launch Widow and SSTO Concepts |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
04:03:49 - 04:24:53 || |
358 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 29: Reentry Concept |
Prof. Ashok Joshi |
UG |
11-02-2023
Saturday-
|
Time
Time
|
04:24:53 - 05:00:07 || |
359 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 20: Tutorial |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
11-02-2023
Saturday-
|
Time
Time
|
05:00:07 - 05:59:52 || |
360 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 47: Live Session |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
11-02-2023
Saturday-
|
Time
Time
|
05:59:52 - 07:03:07 || |
361 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 12: Calculus of variations (a primer):
Euler-Lagrange equations |
Prof. Harish N Dixit |
UG |
11-02-2023
Saturday-
|
Time
Time
|
07:03:07 - 08:00:08 || |
362 |
Aerospace
Engineering |
Aircraft Design |
Lec 46: Numericals |
Dr. A.K. Ghosh |
UG |
11-02-2023
Saturday-
|
Time
Time
|
08:00:08 - 09:03:54 || |
363 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 07: Terminology related to secondary battery :
half-cell,full-cell, redox couple,positive |
Prof. Subhasish Basu Majumder |
UG |
11-02-2023
Saturday-
|
Time
Time
|
09:03:54 - 09:41:44 || |
364 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 08: Measurements: Cyclic voltammetry, nominal
voltage, capacity, rate performance |
Prof. Subhasish Basu Majumder |
UG |
11-02-2023
Saturday-
|
Time
Time
|
09:41:44 - 10:14:49 || |
365 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 24 |
Prof. Somnath Bhowmick |
UG |
11-02-2023
Saturday-
|
Time
Time
|
10:14:49 - 10:39:15 || |
366 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 25 |
Prof. Somnath Bhowmick |
UG |
11-02-2023
Saturday-
|
Time
Time
|
10:39:15 - 11:05:42 || |
367 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 29: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
11-02-2023
Saturday-
|
Time
Time
|
11:05:42 - 11:34:29 || |
368 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 30: Introduction to Fatigue |
Prof. Indrani Sen |
UG |
11-02-2023
Saturday-
|
Time
Time
|
11:34:29 - 12:12:35 || |
369 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 04: Entropy Analysis (Part I) |
Prof. Niranjan Sahoo |
UG |
11-02-2023
Saturday-
|
Time
Time
|
12:12:35 - 13:22:59 || |
370 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13B: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
11-02-2023
Saturday-
|
Time
Time
|
13:22:59 - 14:04:59 || |
371 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 15 |
Prof. Srikant Sukumar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
14:04:59 - 14:36:34 || |
372 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 16 |
Prof. Srikant Sukumar |
UG |
11-02-2023
Saturday-
|
Time
Time
|
14:36:34 - 15:09:18 || |
373 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 35: MATLAB Demonstration for Fully and
Partially Perforated CTR |
Prof. Akhilesh Mimani |
UG |
11-02-2023
Saturday-
|
Time
Time
|
15:09:18 - 16:00:49 || |
374 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
16:00:49 - 16:32:35 || |
375 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
16:32:35 - 17:04:21 || |
376 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
17:04:21 - 18:06:15 || |
377 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
12-02-2023
Sunday-
|
Time
Time
|
18:06:15 - 18:40:31 || |
378 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 18: GFIS Properties and Ion Optical Column |
Prof. Debabrata Pradhan |
UG |
12-02-2023
Sunday-
|
Time
Time
|
18:40:31 - 19:12:29 || |
379 |
Aerospace
Engineering |
Satellite Attitude
Dynamics and Control |
Lec 43: Control Moment Gyroscope |
Dr. Manoranjan Sinha |
UG |
12-02-2023
Sunday-
|
Time
Time
|
19:12:29 - 20:12:48 || |
380 |
Mechanical
engineering |
Fundamentals of
Additive
Manufacturing
Technologies |
Lec 29: Laser Beam based Powder Bed Additive
Manufacturing (Part 1) |
Prof. Sajan Kapil |
UG |
12-02-2023
Sunday-
|
Time
Time
|
20:12:48 - 21:08:22 || |
381 |
Aerospace
Engineering |
Introduction to
Aerodynamics |
Lec 45: Boundary - Layer Theory (Contd. ) |
Dr. K.P. Sinhamahapatra |
UG |
12-02-2023
Sunday-
|
Time
Time
|
21:08:22 - 22:08:05 || |
382 |
Mechanical
engineering |
Robotics: Basics and
Selected Advanced
Concepts |
Lec 27: Introduction, Lagrangian formulation |
Prof. Ashitava Ghosal |
UG |
12-02-2023
Sunday-
|
Time
Time
|
22:08:05 - 22:55:00 || |
383 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 36: Design Strategies (Contd.) |
Prof. Chetankumar Sureshbhai Mistry |
UG |
12-02-2023
Sunday-
|
Time
Time
|
22:55:00 - 23:31:30 || |
384 |
Aerospace
Engineering |
Aerodynamic Design
of Axial Flow
Compressors & Fans |
Lec 37: Design of Low Speed Compressor |
Prof. Chetankumar Sureshbhai Mistry |
UG |
12-02-2023
Sunday-
|
Time
Time
|
23:31:30 - 24:00:00 || |
385 |
Metallurgical
Engineering and
Material Science |
Mine Closure and
Sustainability
Planning |
Lec 21: Application of Remote Sensing for Mine
Closure-Introduction |
Prof. Khanindra Pathak |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
386 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 02 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
387 |
Mechanical
Enineering |
Metal Additive
Manufacturing |
Lecture 03 |
Prof. Janakranjan Ramkumar,
Prof. Amandeep Singh Oberoi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
388 |
Aerospace
Engineering |
Introduction to
Helicopter
Aerodynamics and
Dynamics |
Lec 05B: Introduction to Helicopter Aerodynamics
and Dynamics |
Prof. A.R. Manjunath, Prof. C. Venkatesan |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
389 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 26: Microfabrication with Glass-Like Carbon |
Prof. Swati Sharma |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
390 |
Metallurgical
Engineering and
Material Science |
Carbon Materials and
Manufacturing |
Lec 27: X-Ray and Nano-Imprint Lithography |
Prof. Swati Sharma |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
391 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 28: Launch Widow and SSTO Concepts |
Prof. Ashok Joshi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
392 |
Aerospace
Engineering |
Introduction to
Launch Vehicle
Analysis and Design |
Lec 29: Reentry Concept |
Prof. Ashok Joshi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
393 |
Aerospace
Engineering |
Introduction to
Aerospace Propulsion |
Lec 20: Tutorial |
Prof. Bhaskar Roy, Prof. A M Pradeep |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
394 |
Mechanical
engineering |
Wheeled Mobile
Robots |
Lec 47: Live Session |
Prof. Asokan Thondiyath, Prof. Santhakumar Mohan |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
395 |
Mechanical
engineering |
Interfacial Fluid
Mechanics |
Lec 12: Calculus of variations (a primer):
Euler-Lagrange equations |
Prof. Harish N Dixit |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
396 |
Aerospace
Engineering |
Aircraft Design |
Lec 46: Numericals |
Dr. A.K. Ghosh |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
397 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 07: Terminology related to secondary battery :
half-cell,full-cell, redox couple,positive |
Prof. Subhasish Basu Majumder |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
398 |
Metallurgical
Engineering and
Material Science |
Electrochemical
Energy Storage |
Lec 08: Measurements: Cyclic voltammetry, nominal
voltage, capacity, rate performance |
Prof. Subhasish Basu Majumder |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
399 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 24 |
Prof. Somnath Bhowmick |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
400 |
Metallurgical
Engineering and
Material Science |
Electronic
Properties of the
Materials:
Computational
Approach |
Lecture 25 |
Prof. Somnath Bhowmick |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
401 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 29: Environment Assisted Fracture (Contd.) |
Prof. Indrani Sen |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
402 |
Metallurgical
Engineering and
Material Science |
Fracture, Fatigue
and Failure of
Materials |
Lec 30: Introduction to Fatigue |
Prof. Indrani Sen |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
403 |
Mechanical
Engineering and
Science |
Advanced
Thermodynamics and
Combustion |
Lec 04: Entropy Analysis (Part I) |
Prof. Niranjan Sahoo |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
404 |
Mechanical
Engineering and
Science |
Introduction to
Turbulence |
Lec 13B: Derivation of Boundary Layer Equations in
Turbulent Flows_1 |
Prof. Rinku Mukherjee |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
405 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 15 |
Prof. Srikant Sukumar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
406 |
Mechanical
engineering |
Nonlinear Adaptive
Control |
Lecture 16 |
Prof. Srikant Sukumar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
407 |
Mechanical
engineering |
Muffler Acoustics
– Application to
Automotive Exhaust
Noise Control |
Lec 35: MATLAB Demonstration for Fully and
Partially Perforated CTR |
Prof. Akhilesh Mimani |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
408 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 39: Fused bath and Gas Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
409 |
Metallurgy and
material science |
Environmental
Degradation and
Surface Engineering |
Lec 40: Plasma Nitriding |
Prof. Indranil Manna,
Prof. Jyotsna Dutta Majumdar |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
410 |
Mechanical
engineering |
Laser Based
Manufacturing |
Lec 04: Principle of Operation, Types of Laser
Cutting, and Kerf Geometry |
Prof. Shrikrishna N. Joshi |
UG |
12-02-2023
Sunday-
|
Time
Time
|
|
411 |
Metallurgy and
material science |
Scanning Electron /
Ion / Probe
Microscopy in
Materials
Characterization |
Lec 17: Ions Source in HIM |
Prof. Debabrata Pradhan |
UG |
12-02-2023
Sunday-
|
Time
|