| No. | Subject | Course | Topic | User Category | Telecast Date / Day | Telecast Time | Repeat Time |
|---|---|---|---|---|---|---|---|
| 1 | engineering | Radiation | Thermal Radiation | 08:00:00 - 09:00:16 || | |||
| 2 | Engineering and Science | fundamentals | descent method and rate of convergence | 09:00:16 - 09:30:23 || | |||
| 3 | Engineering and Science | fundamentals | method | 09:30:23 - 10:00:26 || | |||
| 4 | engineering | Rotor Dynamics | Matrix Method II | 10:00:26 - 11:00:34 || | |||
| 5 | Engineering and Science | Engineering Design | 11:00:34 - 12:00:20 || | ||||
| 6 | engineering | Process Technology Part I | of Machining Processes | 12:00:20 - 12:18:13 || | |||
| 7 | engineering | Process Technology Part I | Basic Machining Processes and the Mechanics of Chip Formation | 12:18:13 - 12:38:51 || | |||
| 8 | engineering | Process Technology Part I | Cutting Ratio and Shear Angle | 12:38:51 - 13:00:10 || | |||
| 9 | engineering | Mechanical Measurement | first order systems | 13:00:10 - 14:07:59 || | |||
| 10 | engineering | Analysis | Accounting for Transverse Sensitivity Effects | 14:07:59 - 15:01:36 || | |||
| 11 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Discharge Flow Characteristics) | 15:01:36 - 16:00:31 || | |||
| 12 | engineering | rooms | 16:00:31 - 17:00:37 || | ||||
| 13 | engineering | Design | Linearization: Part 5 | 17:00:37 - 17:29:43 || | |||
| 14 | engineering | Design | Linearization: Part 6 | 17:29:43 - 18:00:28 || | |||
| 15 | engineering | Processes | Machining Processes | 18:00:28 - 18:58:36 || | |||
| 16 | engineering | Production Management | Job Shops | 18:58:36 - 20:00:36 || | |||
| 17 | engineering | Radiation | Thermal Radiation | 20:00:36 - 21:00:52 || | |||
| 18 | Engineering and Science | fundamentals | descent method and rate of convergence | 21:00:52 - 21:30:59 || | |||
| 19 | Engineering and Science | fundamentals | method | 21:30:59 - 22:01:02 || | |||
| 20 | engineering | Rotor Dynamics | Matrix Method II | 22:01:02 - 23:01:10 || | |||
| 21 | Engineering and Science | Engineering Design | 23:01:10 - 00:00:56 || | ||||
| 22 | engineering | Process Technology Part I | of Machining Processes | 00:00:56 - 00:18:49 (2025-03-02) || | |||
| 23 | engineering | Process Technology Part I | Basic Machining Processes and the Mechanics of Chip Formation | 00:18:49 - 00:39:27 (2025-03-02) || | |||
| 24 | engineering | Process Technology Part I | Cutting Ratio and Shear Angle | 00:39:27 - 01:00:46 (2025-03-02) || | |||
| 25 | engineering | Mechanical Measurement | first order systems | 01:00:46 - 02:08:35 (2025-03-02) || | |||
| 26 | engineering | Analysis | Accounting for Transverse Sensitivity Effects | 02:08:35 - 03:02:12 (2025-03-02) || | |||
| 27 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Discharge Flow Characteristics) | 03:02:12 - 04:01:07 (2025-03-02) || | |||
| 28 | engineering | rooms | 04:01:07 - 05:01:13 (2025-03-02) || | ||||
| 29 | engineering | Design | Linearization: Part 5 | 05:01:13 - 05:30:19 (2025-03-02) || | |||
| 30 | engineering | Design | Linearization: Part 6 | 05:30:19 - 06:01:04 (2025-03-02) || | |||
| 31 | engineering | Processes | Machining Processes | 06:01:04 - 06:59:12 (2025-03-02) || | |||
| 32 | engineering | Production Management | Job Shops | 06:59:12 - 08:00:00 (2025-03-02) || | |||
| 33 | engineering | coefficient, and irregular rooms | 08:00:00 - 08:59:42 || | ||||
| 34 | engineering | Design | Linearization: Part 6 | 08:59:42 - 09:22:19 || | |||
| 35 | engineering | Design | Linearization: Part 7 | 09:22:19 - 10:00:11 || | |||
| 36 | engineering | Processes | Machining Processes | 10:00:11 - 10:59:35 || | |||
| 37 | engineering | Thermal Engineering | Thermodynamics Systems | 10:59:35 - 12:00:15 || | |||
| 38 | engineering | Radiation | Thermal Radiation | 12:00:15 - 13:00:31 || | |||
| 39 | Engineering and Science | fundamentals | descent method and rate of convergence | 13:00:31 - 13:30:38 || | |||
| 40 | Engineering and Science | fundamentals | method | 13:30:38 - 14:00:41 || | |||
| 41 | engineering | Rotor Dynamics | Matrix Method II | 14:00:41 - 15:00:49 || | |||
| 42 | Engineering and Science | Engineering Design | 15:00:49 - 16:00:35 || | ||||
| 43 | engineering | Process Technology Part I | of Machining Processes | 16:00:35 - 16:18:28 || | |||
| 44 | engineering | Process Technology Part I | Basic Machining Processes and the Mechanics of Chip Formation | 16:18:28 - 16:39:06 || | |||
| 45 | engineering | Process Technology Part I | Cutting Ratio and Shear Angle | 16:39:06 - 17:00:25 || | |||
| 46 | engineering | Mechanical Measurement | first order systems | 17:00:25 - 18:08:14 || | |||
| 47 | engineering | Analysis | Accounting for Transverse Sensitivity Effects | 18:08:14 - 19:01:51 || | |||
| 48 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Discharge Flow Characteristics) | 19:01:51 - 20:00:46 || | |||
| 49 | engineering | coefficient, and irregular rooms | 20:00:46 - 21:00:28 || | ||||
| 50 | engineering | Design | Linearization: Part 6 | 21:00:28 - 21:23:05 || | |||
| 51 | engineering | Design | Linearization: Part 7 | 21:23:05 - 22:00:57 || | |||
| 52 | engineering | Processes | Machining Processes | 22:00:57 - 23:00:21 || | |||
| 53 | engineering | Thermal Engineering | Thermodynamics Systems | 23:00:21 - 00:01:01 || | |||
| 54 | engineering | Radiation | Thermal Radiation | 00:01:01 - 01:01:17 (2025-03-04) || | |||
| 55 | Engineering and Science | fundamentals | descent method and rate of convergence | 01:01:17 - 01:31:24 (2025-03-04) || | |||
| 56 | Engineering and Science | fundamentals | method | 01:31:24 - 02:01:27 (2025-03-04) || | |||
| 57 | engineering | Rotor Dynamics | Matrix Method II | 02:01:27 - 03:01:35 (2025-03-04) || | |||
| 58 | Engineering and Science | Engineering Design | 03:01:35 - 04:01:21 (2025-03-04) || | ||||
| 59 | engineering | Process Technology Part I | of Machining Processes | 04:01:21 - 04:19:14 (2025-03-04) || | |||
| 60 | engineering | Process Technology Part I | Basic Machining Processes and the Mechanics of Chip Formation | 04:19:14 - 04:39:52 (2025-03-04) || | |||
| 61 | engineering | Process Technology Part I | Cutting Ratio and Shear Angle | 04:39:52 - 05:01:11 (2025-03-04) || | |||
| 62 | engineering | Mechanical Measurement | first order systems | 05:01:11 - 06:09:00 (2025-03-04) || | |||
| 63 | engineering | Analysis | Accounting for Transverse Sensitivity Effects | 06:09:00 - 07:02:37 (2025-03-04) || | |||
| 64 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Discharge Flow Characteristics) | 07:02:37 - 08:00:00 (2025-03-04) || | |||
| 65 | engineering | Process Technology Part I | Force Analysis | 08:00:00 - 08:17:38 || | |||
| 66 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 08:17:38 - 09:00:15 || | |||
| 67 | engineering | Mechanical Measurement | second order systems | 09:00:15 - 10:00:31 || | |||
| 68 | engineering | Analysis | Factors for Special Applications | 10:00:31 - 11:00:38 || | |||
| 69 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 11:00:38 - 12:00:06 || | |||
| 70 | engineering | coefficient, and irregular rooms | 12:00:06 - 12:59:48 || | ||||
| 71 | engineering | Design | Linearization: Part 6 | 12:59:48 - 13:22:25 || | |||
| 72 | engineering | Design | Linearization: Part 7 | 13:22:25 - 14:00:17 || | |||
| 73 | engineering | Processes | Machining Processes | 14:00:17 - 14:59:41 || | |||
| 74 | engineering | Thermal Engineering | Thermodynamics Systems | 14:59:41 - 16:00:21 || | |||
| 75 | engineering | Radiation | Thermal Radiation | 16:00:21 - 17:00:37 || | |||
| 76 | Engineering and Science | fundamentals | descent method and rate of convergence | 17:00:37 - 17:30:44 || | |||
| 77 | Engineering and Science | fundamentals | method | 17:30:44 - 18:00:47 || | |||
| 78 | engineering | Rotor Dynamics | Matrix Method II | 18:00:47 - 19:00:55 || | |||
| 79 | Engineering and Science | Engineering Design | 19:00:55 - 20:00:41 || | ||||
| 80 | engineering | Process Technology Part I | Force Analysis | 20:00:41 - 20:18:19 || | |||
| 81 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 20:18:19 - 21:00:56 || | |||
| 82 | engineering | Mechanical Measurement | second order systems | 21:00:56 - 22:01:12 || | |||
| 83 | engineering | Analysis | Factors for Special Applications | 22:01:12 - 23:01:19 || | |||
| 84 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 23:01:19 - 00:00:47 || | |||
| 85 | engineering | coefficient, and irregular rooms | 00:00:47 - 01:00:29 (2025-03-05) || | ||||
| 86 | engineering | Design | Linearization: Part 6 | 01:00:29 - 01:23:06 (2025-03-05) || | |||
| 87 | engineering | Design | Linearization: Part 7 | 01:23:06 - 02:00:58 (2025-03-05) || | |||
| 88 | engineering | Processes | Machining Processes | 02:00:58 - 03:00:22 (2025-03-05) || | |||
| 89 | engineering | Thermal Engineering | Thermodynamics Systems | 03:00:22 - 04:01:02 (2025-03-05) || | |||
| 90 | engineering | Radiation | Thermal Radiation | 04:01:02 - 05:01:18 (2025-03-05) || | |||
| 91 | Engineering and Science | fundamentals | descent method and rate of convergence | 05:01:18 - 05:31:25 (2025-03-05) || | |||
| 92 | Engineering and Science | fundamentals | method | 05:31:25 - 06:01:28 (2025-03-05) || | |||
| 93 | engineering | Rotor Dynamics | Matrix Method II | 06:01:28 - 07:01:36 (2025-03-05) || | |||
| 94 | Engineering and Science | Engineering Design | 07:01:36 - 08:00:00 (2025-03-05) || | ||||
| 95 | engineering | Radiation | definition | 08:00:00 - 09:00:15 || | |||
| 96 | Engineering and Science | fundamentals | methods | 09:00:15 - 09:17:24 || | |||
| 97 | Engineering and Science | fundamentals | Penalty methods | 09:17:24 - 10:00:23 || | |||
| 98 | engineering | Rotor Dynamics | Matrix Method III | 10:00:23 - 11:00:01 || | |||
| 99 | Engineering and Science | Engineering Design | 11:00:01 - 12:00:01 || | ||||
| 100 | engineering | Process Technology Part I | Force Analysis | 12:00:01 - 12:17:39 || | |||
| 101 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 12:17:39 - 13:00:16 || | |||
| 102 | engineering | Mechanical Measurement | second order systems | 13:00:16 - 14:00:32 || | |||
| 103 | engineering | Analysis | Factors for Special Applications | 14:00:32 - 15:00:39 || | |||
| 104 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 15:00:39 - 16:00:07 || | |||
| 105 | engineering | coefficient, and irregular rooms | 16:00:07 - 16:59:49 || | ||||
| 106 | engineering | Design | Linearization: Part 6 | 16:59:49 - 17:22:26 || | |||
| 107 | engineering | Design | Linearization: Part 7 | 17:22:26 - 18:00:18 || | |||
| 108 | engineering | Processes | Machining Processes | 18:00:18 - 18:59:42 || | |||
| 109 | engineering | Thermal Engineering | Thermodynamics Systems | 18:59:42 - 20:00:22 || | |||
| 110 | engineering | Radiation | definition | 20:00:22 - 21:00:37 || | |||
| 111 | Engineering and Science | fundamentals | methods | 21:00:37 - 21:17:46 || | |||
| 112 | Engineering and Science | fundamentals | Penalty methods | 21:17:46 - 22:00:45 || | |||
| 113 | engineering | Rotor Dynamics | Matrix Method III | 22:00:45 - 23:00:23 || | |||
| 114 | Engineering and Science | Engineering Design | 23:00:23 - 00:00:23 || | ||||
| 115 | engineering | Process Technology Part I | Force Analysis | 00:00:23 - 00:18:01 (2025-03-06) || | |||
| 116 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 00:18:01 - 01:00:38 (2025-03-06) || | |||
| 117 | engineering | Mechanical Measurement | second order systems | 01:00:38 - 02:00:54 (2025-03-06) || | |||
| 118 | engineering | Analysis | Factors for Special Applications | 02:00:54 - 03:01:01 (2025-03-06) || | |||
| 119 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 03:01:01 - 04:00:29 (2025-03-06) || | |||
| 120 | engineering | coefficient, and irregular rooms | 04:00:29 - 05:00:11 (2025-03-06) || | ||||
| 121 | engineering | Design | Linearization: Part 6 | 05:00:11 - 05:22:48 (2025-03-06) || | |||
| 122 | engineering | Design | Linearization: Part 7 | 05:22:48 - 06:00:40 (2025-03-06) || | |||
| 123 | engineering | Processes | Machining Processes | 06:00:40 - 07:00:04 (2025-03-06) || | |||
| 124 | engineering | Thermal Engineering | Thermodynamics Systems | 07:00:04 - 08:00:00 (2025-03-06) || | |||
| 125 | engineering | constant, and Sabine's coefficient | 08:00:00 - 09:00:07 || | ||||
| 126 | engineering | Design | Linearization: Part 8 | 09:00:07 - 09:29:43 || | |||
| 127 | engineering | Design | Linearization: Part 9 | 09:29:43 - 09:59:44 || | |||
| 128 | engineering | Processes | Machining Processes | 09:59:44 - 11:00:25 || | |||
| 129 | engineering | Thermal Engineering | First Law of Thermodynamics | 11:00:25 - 12:00:17 || | |||
| 130 | engineering | Radiation | definition | 12:00:17 - 13:00:32 || | |||
| 131 | Engineering and Science | fundamentals | methods | 13:00:32 - 13:17:41 || | |||
| 132 | Engineering and Science | fundamentals | Penalty methods | 13:17:41 - 14:00:40 || | |||
| 133 | engineering | Rotor Dynamics | Matrix Method III | 14:00:40 - 15:00:18 || | |||
| 134 | Engineering and Science | Engineering Design | 15:00:18 - 16:00:18 || | ||||
| 135 | engineering | Process Technology Part I | Force Analysis | 16:00:18 - 16:17:56 || | |||
| 136 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 16:17:56 - 17:00:33 || | |||
| 137 | engineering | Mechanical Measurement | second order systems | 17:00:33 - 18:00:49 || | |||
| 138 | engineering | Analysis | Factors for Special Applications | 18:00:49 - 19:00:56 || | |||
| 139 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 19:00:56 - 20:00:24 || | |||
| 140 | engineering | constant, and Sabine's coefficient | 20:00:24 - 21:00:31 || | ||||
| 141 | engineering | Design | Linearization: Part 8 | 21:00:31 - 21:30:07 || | |||
| 142 | engineering | Design | Linearization: Part 9 | 21:30:07 - 22:00:08 || | |||
| 143 | engineering | Processes | Machining Processes | 22:00:08 - 23:00:49 || | |||
| 144 | engineering | Thermal Engineering | First Law of Thermodynamics | 23:00:49 - 00:00:41 || | |||
| 145 | engineering | Radiation | definition | 00:00:41 - 01:00:56 (2025-03-07) || | |||
| 146 | Engineering and Science | fundamentals | methods | 01:00:56 - 01:18:05 (2025-03-07) || | |||
| 147 | Engineering and Science | fundamentals | Penalty methods | 01:18:05 - 02:01:04 (2025-03-07) || | |||
| 148 | engineering | Rotor Dynamics | Matrix Method III | 02:01:04 - 03:00:42 (2025-03-07) || | |||
| 149 | Engineering and Science | Engineering Design | 03:00:42 - 04:00:42 (2025-03-07) || | ||||
| 150 | engineering | Process Technology Part I | Force Analysis | 04:00:42 - 04:18:20 (2025-03-07) || | |||
| 151 | engineering | Process Technology Part I | Theory (Cutting Forces Analysis) | 04:18:20 - 05:00:57 (2025-03-07) || | |||
| 152 | engineering | Mechanical Measurement | second order systems | 05:00:57 - 06:01:13 (2025-03-07) || | |||
| 153 | engineering | Analysis | Factors for Special Applications | 06:01:13 - 07:01:20 (2025-03-07) || | |||
| 154 | engineering | Industrial Oil Hydraulics and Pneumatics | an axial - Piston Swash Plate type Hydrostatic Pump (Estimation of Torque on Drive Shaft and Swash Plate) | 07:01:20 - 08:00:00 (2025-03-07) || | |||
| 155 | engineering | Process Technology Part I | Theory (Force analysis) Part-2 | 08:00:00 - 08:15:12 || | |||
| 156 | engineering | Process Technology Part I | Solution | 08:15:12 - 08:37:30 || | |||
| 157 | engineering | Process Technology Part I | Energy Model for Cutting | 08:37:30 - 09:00:08 || | |||
| 158 | engineering | Mechanical Measurement | digitization & number systems | 09:00:08 - 10:09:42 || | |||
| 159 | engineering | Analysis | Gauges | 10:09:42 - 11:07:39 || | |||
| 160 | engineering | Industrial Oil Hydraulics and Pneumatics | an Axial - Piston Swash Plate type Hydrostatic unit (Pressure Ripple and Swash Plate Torque) | 11:07:39 - 12:00:13 || | |||
| 161 | engineering | constant, and Sabine's coefficient | 12:00:13 - 13:00:20 || | ||||
| 162 | engineering | Design | Linearization: Part 8 | 13:00:20 - 13:29:56 || | |||
| 163 | engineering | Design | Linearization: Part 9 | 13:29:56 - 13:59:57 || | |||
| 164 | engineering | Processes | Machining Processes | 13:59:57 - 15:00:38 || | |||
| 165 | engineering | Thermal Engineering | First Law of Thermodynamics | 15:00:38 - 16:00:30 || | |||
| 166 | engineering | Radiation | definition | 16:00:30 - 17:00:45 || | |||
| 167 | Engineering and Science | fundamentals | methods | 17:00:45 - 17:17:54 || | |||
| 168 | Engineering and Science | fundamentals | Penalty methods | 17:17:54 - 18:00:53 || | |||
| 169 | engineering | Rotor Dynamics | Matrix Method III | 18:00:53 - 19:00:31 || | |||
| 170 | Engineering and Science | Engineering Design | 19:00:31 - 20:00:31 || | ||||
| 171 | engineering | Process Technology Part I | Theory (Force analysis) Part-2 | 20:00:31 - 20:15:43 || | |||
| 172 | engineering | Process Technology Part I | Solution | 20:15:43 - 20:38:01 || | |||
| 173 | engineering | Process Technology Part I | Energy Model for Cutting | 20:38:01 - 21:00:39 || | |||
| 174 | engineering | Mechanical Measurement | digitization & number systems | 21:00:39 - 22:10:13 || | |||
| 175 | engineering | Analysis | Gauges | 22:10:13 - 23:08:10 || | |||
| 176 | engineering | Industrial Oil Hydraulics and Pneumatics | an Axial - Piston Swash Plate type Hydrostatic unit (Pressure Ripple and Swash Plate Torque) | 23:08:10 - 00:00:44 || | |||
| 177 | engineering | constant, and Sabine's coefficient | 00:00:44 - 01:00:51 (2025-03-08) || | ||||
| 178 | engineering | Design | Linearization: Part 8 | 01:00:51 - 01:30:27 (2025-03-08) || | |||
| 179 | engineering | Design | Linearization: Part 9 | 01:30:27 - 02:00:28 (2025-03-08) || | |||
| 180 | engineering | Processes | Machining Processes | 02:00:28 - 03:01:09 (2025-03-08) || | |||
| 181 | engineering | Thermal Engineering | First Law of Thermodynamics | 03:01:09 - 04:01:01 (2025-03-08) || | |||
| 182 | engineering | Radiation | definition | 04:01:01 - 05:01:16 (2025-03-08) || | |||
| 183 | Engineering and Science | fundamentals | methods | 05:01:16 - 05:18:25 (2025-03-08) || | |||
| 184 | Engineering and Science | fundamentals | Penalty methods | 05:18:25 - 06:01:24 (2025-03-08) || | |||
| 185 | engineering | Rotor Dynamics | Matrix Method III | 06:01:24 - 07:01:02 (2025-03-08) || | |||
| 186 | Engineering and Science | Engineering Design | 07:01:02 - 08:00:00 (2025-03-08) || |
Quick Access
Channel & Allocation
Quick Links
Swayam Prabha copyright © 2024 INFLIBNET Centre. All rights reserved.
Visitors :
